Scientific Substantiation of the Temperature Regime for Selective Catalytic Reduction of Nitrogen Oxides on an Alumina-Copper-Zinc Catalyst.

Abstract

The publication investigates the problem of environmental safety during the production of nitric acid, which is accompanied by harmful emissions of nitrogen oxides in the exhaust gases. The authors consider the method of selective catalytic reduction of nitrogen oxides using ammonia on a special alumino-zinc catalyst. It has been proven that traditional low-temperature selective catalytic reduction leads to the environmental problem of 'ammonia slip' into the atmosphere. In contrast, increasing the process temperature to 340–350°C allows for an optimal balance: effective NOx conversion is achieved, and ammonia 'slip' approaches zero. The presence of zinc oxide in the catalyst helps to avoid the sintering of copper oxide clusters at such high temperatures. As a result of the study of the new technological regime, a degree of purification from NOx of 99.8-99.9% was achieved. The concentration of pollutants in the gas is reduced to 2-5 mg/m³, which significantly meets the stringent modern environmental standards and EU Directives.